For a while now I've been having an error message every time I launch Virtual PC for Mac. I really never really looked into it because I've never had any actual problema with the software. After I started this class I decided I would finally look for solutions for these problems. The problem I am referring to is Virtual Switch Networking not being able to start (the error code it also gave me was A1004). It was yesterday when I did a search on code: A1004 and it told me to upgrade the software to 7.0.2 (I have 7.0 installed).
There is now a newer update (7.0.3) which is now installed. All is now fine
Tuesday, September 14, 2010
Good ol' Bob
This post actually comes from one of my A+ assignments
Windows 98 - Part 1
- Create a Windows 98 boot disk -- Don
- Setting up hard disk -- Done
- Format hard disk -- Done
- Install Windows 98 -- Done
- Name computer and Organization: Sean and MATC -- Done
- Cancel Rescue disk -- Done
- Remove floppy disks from drive 'A' -- Done
- No network Password -- Done
SOLUTION: • Make sure Windows 98 CD is still in the drive
• Click on the Start menu and select Add/Remove Programs and make sure you also search in the Drivers folder
• Find the Matrox 6200 driver in the list. click OK
Windows 98 - Part 2
Helping out "Good ol' Bob"
- Bob wants his computer networked to MATCs LAN so he can access the internet for a project.
SOLUTION: • Make sure Windows 98 CD is still in the drive
• Go to the Start menu then click on Control Panel
• Click on Add or Remove Programs
• Click on Add/Remove Windows Components in the sidebar to the left
• Make sure Networking Services is checked. Click Next
2. Bob wants the Freecell game installed on his machine, but it's not their.
SOLUTION: • Click on the Start menu and select Control Panel
• Click on Add or Remove Programs
• Click on Accessories and Utilities and click the Details... button
• Make sure Games is checked. This will add all the games to your computer. If you only want Freecell, double click on Games and only checkmark Freecell
• Click OK
3. Bob wants to increase the resolution of the screen
SOLUTION: • Click the Start menu and select Control Panel
• Double-click on Display
• Click on the Settings tab
4. Bob wants to be able to save images in the Paint aqpplication to the ".jpg" or ".gif" format.
SOLUTION: • First do a search on your computer for 2 files called "jpegim32.flt" and "gifimp32.flt". If you cannot find these files then you can download the Officce Converter Pack from http://support.microsoft.com/kb/212265 (the file is called Oconvpck.exe package)
Release and Renew
I was in mt Network Communications class last week and a student had no internet connection because the Ethernet cable was unplugged. She then plugged the cable back into the jack to no avail. I took a look at it and performed the following steps and all was fine:
SOLUTION:
SOLUTION:
- Go to the start menu and click on Run...
- type cmd and at the DOS prompt, type ipconfig /release
- Now type ipconfig /renew
All was fine
Update: for Macs and other Linux based operating systems. the command is:
You can also create an alias of these two commands by visiting Terminal and input this command:
alias renew="sudo ipconfig set en0 BOOTP && sudo ipconfig set en0 DHCP"
So then you just have one command called renew that will release and renew your DHCP
For a graphical way of doing this:
Open System Preferences
Click on Network
Click on Advanced...
Click on the TCP/IP tab in the bar across the top
Finally, click on Renew DHCP Lease
Update: for Macs and other Linux based operating systems. the command is:
sudo ifconfig en1 down
sudo ifconfig en1 up
For the wired interface, replace en1 with en0.
You can also create an alias of these two commands by visiting Terminal and input this command:
alias renew="sudo ipconfig set en0 BOOTP && sudo ipconfig set en0 DHCP"
So then you just have one command called renew that will release and renew your DHCP
For a graphical way of doing this:
Open System Preferences
Click on Network
Click on Advanced...
Click on the TCP/IP tab in the bar across the top
Finally, click on Renew DHCP Lease
Sunday, September 12, 2010
Adobe's download manager
So today I went into my console (where you can find system wide error message on Mac OS X) and found all these errors pertaining to a particular Property List named "com.akamai.client.plist". Before searching the internet, I Spotlighted my compter but came up empty. I then searched com.akamai.client.plist on the internet and found that this file belongs to Adobe's download manager, which gets downloaded when you download any Adobe software. To get rid of this file (and all those pesky errors), follow the steps below:
SOLUTION:
- Go back to Adobe.com
- Download ANY trial software title
- stop download at anytime and close download manager window
- open terminal from Applications > Utilities
- now type in /Applications/Akamai/admintool uninstall -force and wait for the deletion to get completed
Subscribe to:
Posts (Atom)